Rely on our certified team of experts for your mold testing, mold inspection, and mold remediation needs! Not all IAQ problems are caused by mold. Our mold testing & mold inspection we look at the whole picture. We pass our knowledge and education to you so you have the TRUTH ABOUT MOLD; keeping you from being scared and spending too much money for your mold remediation project.
Our attention to detail and by the book Inspections have resulted in a 98% success rate in correctly identifying, remedying, and preventing future IAQ issues. Mold testing includes: 3 Samples with results in about 24 hours from an independent laboratory in Oklahoma. The 3 samples are typically Air samples unless visible mold growth is found during the mold inspection; then a tape or swab sample will be collected for identification.
At a minimum, 3 samples are required to determine total contaminated area. Mold Remediation is performed per the ANSI/ IICRC S520 Standard and Guide for Professional Mold Remediation.
Our attention to detail and by the book Inspections have resulted in a 98% success rate in correctly identifying, remedying, and preventing future IAQ issues. Mold testing includes: 3 Samples with results in about 24 hours from an independent laboratory in Oklahoma. The 3 samples are typically Air samples unless visible mold growth is found during the mold inspection; then a tape or swab sample will be collected for identification.
At a minimum, 3 samples are required to determine total contaminated area. Mold Remediation is performed per the ANSI/ IICRC S520 Standard and Guide for Professional Mold Remediation.
Services
The truth about mold/ black mold: There are currently 200,000 different types of molds that we know of.
80% of them are dark brown or black in color.
The type of mold can not be determined by a visual inspection.
The truth about mold/ black mold: The toxin it produces does a good job at killing off bacteria.
However, one of the first questions they ask at the ER is are you allergic to Penicillin?
This is because there are many people allergic to it and it is toxic to them.
I am allergic to chocolate.
80% of them are dark brown or black in color.
The type of mold can not be determined by a visual inspection.
The truth about mold/ black mold: The toxin it produces does a good job at killing off bacteria.
However, one of the first questions they ask at the ER is are you allergic to Penicillin?
This is because there are many people allergic to it and it is toxic to them.
I am allergic to chocolate.
Something happens (like getting a splinter) to break the skin and insert the mold directly into the body.
Most symptoms from Toxic Black Mold are experienced as acute manifestations and are characterized by a variety of neurological signs, such as tremors, lack of coordination, and impaired or loss of vision.
Other chronic manifestations such as dermonecrosis, leucopenia, gastrointestinal ulceration, and hemorrhage have also been noted.
Humans have the ability to say "I don't feel good; i'm going to the doctor" and Cows say "Moo".
Most symptoms from Toxic Black Mold are experienced as acute manifestations and are characterized by a variety of neurological signs, such as tremors, lack of coordination, and impaired or loss of vision.
Other chronic manifestations such as dermonecrosis, leucopenia, gastrointestinal ulceration, and hemorrhage have also been noted.
Humans have the ability to say "I don't feel good; i'm going to the doctor" and Cows say "Moo".
The bottle says it can be used to kill mold/ black mold on "hard non-porous surfaces/ materials only."
Hard non-porous surfaces are metal, glass, plastics, etc.
The label on the bottle also states to dilute the bleach with water.
See below the instructions from our EPA Master Label for mold/mildew removal using Clorox(R) Regular-Bleach.
1. Make a solution of 3/4 cup Clorox(R) Regular-Bleach per gallon of warm water (2700ppm available chlorine solution) - best practices are to always pre-clean the surfaces of any visible material.
Hard non-porous surfaces are metal, glass, plastics, etc.
The label on the bottle also states to dilute the bleach with water.
See below the instructions from our EPA Master Label for mold/mildew removal using Clorox(R) Regular-Bleach.
1. Make a solution of 3/4 cup Clorox(R) Regular-Bleach per gallon of warm water (2700ppm available chlorine solution) - best practices are to always pre-clean the surfaces of any visible material.
If mold growth is visible during the Mold Inspection; then a tape/ swab sample will be collected for identification during the Mold Testing and read by an independent laboratory.
Mold Remediation (mold removal) is required for visible mold growth.
A visual mold inspection looks for signs of water damage, visual mold growth, and other things that may contribute to an indoor air quality problem.
Then the Mold Testing is performed and a determination is made from the requirement of Mold Remediation.
Mold Remediation (mold removal) is required for visible mold growth.
A visual mold inspection looks for signs of water damage, visual mold growth, and other things that may contribute to an indoor air quality problem.
Then the Mold Testing is performed and a determination is made from the requirement of Mold Remediation.
Reviews
Be the first to review Dirty Deeds.
Write a Review
